| | |
| |
|
Ár |
799.990 Ft |
| Rövid leírás |
Designed by John Curl - creator of the legendary Vendetta Research phono preamp
|
| Termék kódja |
100010
|
| Súly |
8.60 kg
|
|
Inputs and outputs use Vampire brand 24k gold-plated RCA jacks
| |
|
Balanced outputs use Neutrik brand premium XLR jacks
| |
|
MM 47k ohm, MC 47k ohm or MC variable 50-550 Ohms
| |
|
RIAA accurate within 0.2 dB
| |
|
Exclusively Vishay-Dale resistors in the audio path
| |
|
Triple shielding; low-carbon mild steel partitions isolate the power supplies & AC wires
| |
|
Dual mono design; each audio channel is separately enclosed in its own extruded aluminum enclosure
| |
|
Separate high speed-soft recovery rectifiers, filter caps and voltage regulators for each channel
| |
|
Superior R-core type power transformer
| |
|
Mono switch can improve sound of mono and older LPs
| |
|
Built-in AC line conditioner to prevent AC noise from polluting the circuits
| |
|
AC polarity reverse switch can reduce hum in many systems
| |
|
Non-magnetic aluminum rear panel for purest sound
| |
|
Turn On Options switch
| manual or auto with 12v trigger input |
|
Premium detachable heavy gauge IEC AC cord
| |
|
2u Chassis, rack mountable with HRA2 (sold separately)
| |
|
How the JC 3+ improves on the original JC 3
| Variable MC load adjust independent for each channel from 50-550 ohms with dual gang potentiometers specially made for Parasound by Vishay. |
|
Curl-Thompson tweaked circuits to further reduce the JC 3 silent background noise.
| |
|
24k gold plated copper traces on phono module boards for utmost conductivity and most transparency/detail in the music.
| |
|
47% larger low ESD power supply filter caps greater reserve for head-snapping dynamics.
| |
|
82% larger R-core power transformer greater reserve for more low end impact.
| |
|
Ability to turn off illumination of the front panel P logo.
| |
|
Now Available in Silver or Black. Frequency Response
| |
|
20 Hz – 20 kHz, +/- 0.2 dB Total Harmonic Distortion
| |
|
< 0.01% at 1 kHz Signal to Noise Ratio, MM > 87 dB, input shorted, IHF A-weighted
| |
|
> 78 dB, input shorted, unweighted Signal to Noise Ratio, MC
| |
|
> 87 dB, input shorted, IHF A-weighted
| |
|
> 67 dB, input shorted, unweighted Interchannel Crosstalk
| |
|
72 dB at 1 kHz Input Impedance
| |
|
MM
| 48 dB |
|
MC
| 64 dB |
|
Unbalanced
| < 100 Ω |
|
Balanced
| < 100 Ω per leg |
|
Input Sensitivity at 1 kHz
| |
|
Output MC
| 600µV for 1 V |
|
Output Total Gain
| |
|
XLR Pin Identification 1 = Ground (Shield) 2 = Positive 3 = Negative (Return) AC Power Requirement Standby
| 1 watt Power On |
|
| |
